Low Cost Sensors – 608A11

Low-cost, general purpose, industrial ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 10-ft integral cable, single point ISO 17025 accredited calibration

Model: 608A11

Low-cost industrial accelerometer with integral 10 ft. cable to blunt termination, 100 mV/g, general purpose, submersible, ceramic shear ICP®, 0.5 to 10k Hz, top exit.

Options:

Specifications

ENGLISH SI
Performance
    Sensitivity (±15 %) 100 mV/g 10.2 mV/(m/s²) [1]
    Measurement Range ±50 g ±490 m/s²
    Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz
    Resonant Frequency 1320 kcpm 22 kHz [2]
    Broadband Resolution (1 to 10000 Hz) 350 µg 3434 µm/sec2 [2]
    Non-Linearity ±1 % ±1 % [3]
    Transverse Sensitivity ≤7 % ≤7 %
Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk
    Temperature Range -65 to +250 °F -54 to +121 °C
    Temperature Response See Graph %/°F See Graph %/°F [2]
    Enclosure Rating IP68 IP68
Electrical
    Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec
    Discharge Time Constant ≥0.3 sec ≥0.3 sec
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC
    Constant Current Excitation 2 to 20 mA 2 to 20 mA
    Output Impedance
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
    Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [2]
    Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2]
    Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2]
    Electrical Isolation >100000000 Ohm >100000000 Ohm
Physical
    Size – Hex 9/16 in 14 mm
    Size – Height 2.5 in 64 mm
    Weight 3.5 oz 99.3 gm
    Mounting Stud Stud
    Mounting Thread 1/4-28 Female 1/4-28 Female [4]
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
    Sensing Element Ceramic Ceramic
    Sensing Geometry Shear Shear
    Housing Material Stainless Steel Stainless Steel
    Sealing Molded Molded
    Electrical Connector Molded Integral Cable Molded Integral Cable
    Electrical Connection Position Top Top
    Cable Length 10 ft 3 m
    Cable Type Polyurethane Polyurethane [5]
All specifications are at room temperature unless otherwise specified.
Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] 1/4-28 has no equivalent in S.I. units.
[5] Twisted shielded pair.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories:
Supplied
081A40 Mounting Stud (1)
ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
ENGLISH SI
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<=Ta<=121°C, II 3 G
    Hazardous Area Approval EEx nL IIC T4, -40°C<=Ta<=121°C, II 1 G
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4
(LB) Low Bias Voltage
ENGLISH SI
    Output Bias Voltage 4.8 to 6.5
    Excitation Voltage 12 to 28
    Measurement Range ±10 ±98
(M) Metric Mount
ENGLISH SI
Accessories:
M081A61 Mounting Stud (1)
(TO) Temperature Output
ENGLISH SI
    Temperature Output Range +36 to +250 °F +2 to +121 °C
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connector Molded Integral Cable
    Electrical Connections (Red) Acceleration Output
    Electrical Connections (Black) Ground
    Electrical Connections (White) Temperature Output

Product Enquiry

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

How may we assist?

Name(Required)
This field is for validation purposes and should be left unchanged.