Featured

Oil Lab Series
Read More
Asset Reliability Practitioner (ARP) Category I Track B
Read More

Low Cost Sensors – 603C01

Category

Low-cost Industrial ICP® Accelerometer General purpose, industrial, ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin conn., single point ISO 17025 accredited calibration

Model: 602D01

Platinum Stock Products; General purpose, industrial, ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin conn., single point ISO 17025 accredited calibration

The 603C01 is one model in a very diverse line of 603-Series accelerometers.  The 603-Series includes alternative sensitivity models, hazardous area approved models, dual output models and models with an integral cable..

  • Sensitivity: (±10%) 100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB) 30 to 600000 cpm (0.5 to 10000 Hz)
  • Measurement Range: ±50 g (±490 m/s²)
  • Electrical Connector: 2-Pin MIL-C-5015

Options:

  • Base Model
  • (EX) Hazardous Area Approval
  • (M) Metric Mount
  • (TO) Temperature Output
Manual
Specification
Drawing
Sensor Product Finder

Specifications

ENGLISH SI
Performance
    Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²) [1]
    Measurement Range ±50 g ±490 m/s²
    Frequency Range (±3 dB) 30 to 600000 cpm 0.5 to 10000 Hz [4]
    Resonant Frequency 1500 kcpm 25 kHz [2]
    Broadband Resolution (1 to 10000 Hz) 350 µg 3434 µm/sec2 [2]
    Non-Linearity ±1 % ±1 % [3]
    Transverse Sensitivity ≤7 % ≤7 %
Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk
    Temperature Range -65 to +250 °F -54 to +121 °C
    Temperature Response See Graph %/°F See Graph %/°F [2]
    Enclosure Rating IP68 IP68
Electrical
    Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec
    Discharge Time Constant ≥0.3 sec ≥0.3 sec
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC
    Constant Current Excitation 2 to 20 mA 2 to 20 mA
    Output Impedance
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
    Spectral Noise (10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [2]
    Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [2]
    Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2]
    Electrical Isolation >100000000 Ohm >100000000 Ohm
Physical
    Size – Hex 11/16 in 18 mm
    Size – Height 1.65 in 42.2 mm
    Weight 1.8 oz 51 gm
    Mounting Thread 1/4-28 Female No Metric Equivalent [5]
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
    Sensing Element Ceramic Ceramic
    Sensing Geometry Shear Shear
    Housing Material Stainless Steel Stainless Steel
    Sealing Welded Hermetic Welded Hermetic
    Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015
    Electrical Connection Position Top Top

 

All specifications are at room temperature unless otherwise specified.



Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories:
Supplied
081A40 Mounting Stud (1)
ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
ENGLISH SI
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<=Ta<=121°C, II 1 G
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4
    Hazardous Area Approval EEx nL IIC T4, -40°C<=Ta<=121°C, II 3 G
(M) Metric Mount
ENGLISH SI
Accessories:
M081A61 Mounting Stud (1)
(TO) Temperature Output
ENGLISH SI
    Temperature Output Range +36 to +250 °F +2 to +121 °C
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connector 3-Pin MIL-C-5015
    Electrical Connections (Pin A) Acceleration Output
    Electrical Connections (Pin B) Ground
    Electrical Connections (Pin C) Temperature Output
    Size – Height 1.86 in 47.2
    Weight 2.0 oz 56.7

Product Enquiry

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Related Products

Related products

24/7 Support

Products
Services
Training
Contact us
Subscribe to Newsletter
Product Support
Copyright © Yellotec 2023. All rights reserved

How may we assist?

Name(Required)
This field is for validation purposes and should be left unchanged.