622B01

General purpose, industrial, ceramic shear ICP® accelerometer, 100 mV/g, 0.2 to 15k Hz, top exit, MIL type connector, frequency sweep ISO 17025 accredited calibration.

Specifications

ENGLISH SI
Performance
    Sensitivity (±5 %) 100 mV/g 10.2 mV/(m/s²) [1]
    Measurement Range ±50 g ±490 m/s²
    Frequency Range (±5 %) 35 to 360000 cpm 0.58 to 6000 Hz [4]
    Frequency Range (±10 %) 25 to 600000 cpm 0.42 to 10000 Hz
    Frequency Range (±3 dB) 12 to 900000 cpm 0.2 to 15000 Hz
    Resonant Frequency 1800 kcpm 30 kHz [2]
    Broadband Resolution (1 to 10000 Hz) 50 µg 490 µm/sec2 [2]
    Non-Linearity ±1 % ±1 % [3]
    Transverse Sensitivity ≤5 % ≤5 %
Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk
    Temperature Range -65 to +250 °F -54 to +121 °C
    Temperature Response See Graph %/°F See Graph %/°F [2]
    Enclosure Rating IP68 IP68
Electrical
    Settling Time (within 1% of bias) ≤5.0 sec ≤5.0 sec
    Discharge Time Constant ≥0.8 sec ≥0.8 sec
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC
    Constant Current Excitation 2 to 20 mA 2 to 20 mA
    Output Impedance
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
    Spectral Noise (10 Hz) 4.0 µg/√Hz 39.2 (µm/sec2)/√Hz [2]
    Spectral Noise (100 Hz) 0.8 µg/√Hz 7.85 (µm/sec2)/√Hz [2]
    Spectral Noise (1 kHz) 0.4 µg/√Hz 3.92 (µm/sec2)/√Hz [2]
    Electrical Protection RFI/ESD RFI/ESD
    Electrical Isolation >100000000 Ohm >100000000 Ohm
Physical
    Size – Hex 7/8 in 22 mm
    Size – Height 2.06 in 52.3 mm
    Weight 3.3 oz 94 gm
    Mounting Thread 1/4-28 Female No Metric Equivalent [5]
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
    Sensing Element Ceramic Ceramic
    Sensing Geometry Shear Shear
    Housing Material Stainless Steel Stainless Steel
    Sealing Welded Hermetic Welded Hermetic
    Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015
    Electrical Connection Position Top Top

 

All specifications are at room temperature unless otherwise specified.

 

 

CE Mark

 

Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
081A40 Mounting Stud (1)
ICS-1 NIST-traceable single-axis amplitude response calibration from 600 cpm (10 Hz) to upper 5% frequency (1)
Optional Versions:
(M) Metric Mount
ENGLISH SI
Accessories:
M081A61 Mounting Stud (1)

Product Enquiry

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Related Products

How may we assist?

Name(Required)
This field is for validation purposes and should be left unchanged.